Product Finder

Filters

Clear
Reset Filters

Our Products

(151 products found)

Aubin®

Aubin® AS-02

End Markets

Energy

Function

Asphaltene Dissolver

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Heavy Aromatic Naphtha-based blend

Description

An organic liquid solvent, specially designed to treat asphaltene deposits. Aubin® AS-02 can be used in downhole treatments, flowlines, pipelines and process equipment. Where practical, batch treating with a soak period is the preferred method of application, although continuous treatment is possible. Agitation or fluid movement through circulation is beneficial, and increased temperatures accelerate deposit removal. For downhole treatments, a typical batch treatment consists of 10 to 20 gallons of Aubin® AS-02 per foot of perforated interval. Aubin® AS-02 can be applied undiluted or, where large volumes are required, may be diluted to a minimum of 20 % by addition of xylene or diesel. As dilution affects performance, laboratory testing should be conducted with the deposit of interest to establish optimum fluid design. Length of contact time depends on the treatment temperature and the nature of deposit and may vary from as little as 10 minutes to several hours.

Aubin®

Aubin® AXI-Zone

End Markets

Energy

Function

Temporary Gel Plug

Geography

GLOBAL

Application

Well Technologies & Pipelines

Business Area

Energy Solutions

Technology

3-component system comprising base of primary and secondary gelling agents, retarder and breaker.

Description

Provides short-term zonal isolation so that workovers or other maintenance operations can be carried out. An easy-to-mix, pumpable fluid that forms a stable, impermeable aqueous gel when placed in a well at temperatures of 180-350 °F. The material retains low viscosity at ambient conditions and remains pumpable for several hours below 100 °F, then undergoes a temperature-dependent transformation into a solid gel above 180 °F.

Aubin®

Aubin® CAS-02

End Markets

Energy

Function

Cement Anti-Settling Agent

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Natural polymer gellant

Description

Designed to prevent sedimentation and/or free water problems in cement slurries, at bottomhole temperatures below 100 ˚C.Aubin® CAS-02 is particularly effective at stabilizing over-dispersed cement slurries, ranging from 12 – 22 ppg densities. Usually used at concentrations ranging from 0.1 – 1.5 %bwoc, although this will vary depending on the type of application, slurry density and the severity of the problem. Aubin® CAS-02 will increase cement slurry viscosity; therefore, the concentration for stabilization must be considered. Can be prehydrated in mixwater or dry blended into the cement, and can be used in fresh water or seawater cement slurries, although efficiency is impaired in systems comprising > 5 % NaCl.

Aubin®

Aubin® CAS-04

End Markets

Energy

Function

Cement Anti-Settling Agent

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Natural polymer gellant

Description

A cement anti-settling additive designed to prevent sedimentation and/or free water problems in cement slurries, at bottomhole temperatures below 150 °C. Particularly effective at stabilizing over-dispersed cement slurries, ranging from 12 – 22 ppg densities. Aubin® CAS-04 is usually used at concentrations ranging from 0.1 – 1.5 %bwoc, although this will vary depending on the type of application, slurry density and the severity of the problem. It will increase cement slurry viscosity; therefore, the concentration for stabilization must be qualified before use. Can be prehydrated in mixwater or dry blended into the cement, and used in fresh water or seawater cement slurries.

Aubin®

Aubin® CAS-05

End Markets

Energy

Function

Cement Anti-Settling Agent

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Natural polymer gellant

Description

A cement anti-settling additive designed to prevent sedimentation and/or free water problems in cement slurries, at bottomhole temperatures below 150 °C. Particularly effective at stabilizing over-dispersed cement slurries, ranging from 12 – 22 ppg densities. Aubin® CAS-04 is usually used at concentrations ranging from 0.05 – 1.0 %bwoc, although this will vary depending on the type of application, slurry density and the severity of the problem. It will increase cement slurry viscosity; therefore, the concentration for stabilization must be qualified before use. Can be prehydrated in mixwater or dry blended into the cement, and used in fresh water or seawater cement slurries.

Aubin®

Aubin® CD-1B

End Markets

Energy

Function

Cement Dispersant

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Sulfonated naphthalene-formaldehyde resin

Description

A naphthalene polymer-based dispersant for cement slurries and is recommended for use at temperatures above 60 °F. Excellent friction reduction is obtained due to reduced viscosity of cement slurries. Friction reduction is especially important where the annulus is less than one inch, so that frictional pressures are not exerted on the formation during cement placement. This allows for efficient mud removal while pumping slurries at high velocities. Aubin® CD-1B is normally used at concentrations between 0.1 and 0.5 %bwoc. Aubin® CD-1B can be added to mix water or can be dry blended with cement.

Aubin®

Aubin® CD-4

End Markets

Energy

Function

Cement Dispersant

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Sulfonated naphthalene-formaldehyde resin

Description

A naphthalene polymer-based dispersant for cement slurries and is recommended for use at temperatures above 60 °F. Excellent friction reduction is obtained due to reduced viscosity of cement slurries. Friction reduction is especially important where the annulus is less than one inch, so that frictional pressures are not exerted on the formation during cement placement. This allows for efficient mud removal while pumping slurries at high velocities. Aubin® CD-4 is normally used at concentrations between 0.1 and 0.5 %bwoc, and can be added to mix water or can be dry blended with cement.

Aubin®

Aubin® CD-6Lt

End Markets

Energy

Function

Cement Dispersant

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Sulfonated naphthalene-formaldehyde resin

Description

A liquid additive that is added to the cement mix water. Used at temperatures up to 450 °F (232°C). Unlike many dispersants, has little retarding effect. Depending on slurry design, used at concentration of 0.15 to 0.35 gal/sk of cement. Reduces rheological properties of cement, lowering friction pressure, easier to achieve turbulent flow. Can enhance the performance of fluid loss control additives.

Aubin®

Aubin® CD-8

End Markets

Energy

Function

Cement Dispersant

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Sulfonated acetone-formaldehyde resin

Description

A powder cement dispersant additive which is essentially non-retarding and compatible with a wide variety of cement slurry designs, including those using salt water. Reduces rheological properties and allows turbulent flow to be achieved at lower pump rates. By reducing the apparent viscosity, lower water content can be utilized, allowing for an increase in slurry density without the need for adding weighting agents. Aubin® CD-8 is a free flowing powder that can be dry-blended into cement or added to mix water. Used at temperatures up to 450 °F (232°C) and at concentrations of 0.1 to 1 %bwoc (typically 0.2 to 0.4 %bwoc). Unlike many dispersants, almost no retarding effect. Reduces rheological properties of cement, lowering friction pressure, making it easier to achieve turbulent flow. Can enhance the performance of fluid loss control additives.

Aubin®

Aubin® CFL-350

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer

Description

A fluid loss control additive for cement slurries for a wide range of temperatures up to 400 °F.. Mildly retarding, and slightly dispersing, Aubin® CFL-350 avoids high gel strengths, making it particularly suitable for coil tubing and squeeze work. The lack of gelation of the slurry by Aubin® CFL-350 helps avoid gas migration problems. Aubin® CFL-350 is effective in slurries using fresh to salt-saturated water. Loadings are typically in the range of 0.3 – 1.0% - the exact loading necessary will depend on laboratory testing.

Aubin®

Aubin® CFL-387M

End Markets

Energy

Function

Latex Stabilizer

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Anionic surfactant blend

Description

A surfactant stabilizer, used with latex cement additives to extend their operational temperature • Typically used in a loading of 4 to 15 %v/v compared to the latex being used in a cement slurry. • Can boost the performance of some latex (such as Aubin® CFL-381M) to temperatures up to 160 °C. • Due to variations in cement, laboratory testing should always be conducted on any slurry design prior to a cement job.

Aubin®

Aubin® CFL-401

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer blend

Description

A fluid loss control additive for cement slurries typically used in low to medium temperature applications (typically 300 °F maximum). Aubin® CFL-401 is compatible with most retarders and is typically used in 0.5 to 1 %bwoc loadings. Laboratory testing is recommended prior to any job, to confirm exact loadings of required additives.

Aubin®

Aubin® CFL-575

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer blend

Description

A fluid loss control additive for cement slurries for a wide range of temperatures up to 400 °F. Provides cost effective fluid loss control with typical loadings of 0.5-2.5 %bwoc, dependent on temperature and slurry design. Performs well in freshwater and in brines up to 18 % salt saturated. Used with synthetic and lignosulfonate-based retarders. Compatible with gas control additives CFL-381M, microsilica, etc. Confirmation testing with field cement and additives is always recommended prior to operations.

Aubin®

Aubin® CFL-585

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer blend

Description

A fluid loss control additive for cement slurries for a wide range of temperatures up to 400 °F. Provides cost effective fluid loss control with typical loadings of 0.5-2.5 %bwoc, dependent on temperature and slurry design. Performs well in freshwater and in brines up to 18 % salt saturated. Used with synthetic and lignosulfonate-based retarders. Compatible with gas control additives CFL-381M, microsilica, etc. Confirmation testing with field cement and additives is always recommended prior to operations.

Aubin®

Aubin® CFL-601

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer

Description

A powder cement fluid loss additive with low gelation potential when left static, typically used up to 350 °F.
Contacts Suppliers