Product Finder

Filters

Clear
Reset Filters

Our Products

(54 products found)

Aubin®

Aubin® CR-105

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Lignosulfonate retarder

Description

A modified lignosulphonate retarder for use when the bottom hole circulating temperature is below 99 °C (210 °F) Aubin® CR-105 has good dispersing properties and can be used in both fresh water and sea water over a range of slurry densities. Provides longer pumping time and delayed onset of compressive strength. Delivers predictable response over range of concentrations and temperatures. Aubin® CR-105 is usually used at concentrations between 0.1 and 0.5% bwoc.

Aubin®

Aubin® CR-112S

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed retarder type blend

Description

A powder cement retarder that is typically used when the bottom hole circulating temperature is above 180 °F. Provides effective retardation of the cement slurry in casing, liner, squeeze and abandonment applications. Aubin® CR-112S has limited dispersing properties and is normally used in conjunction with dispersants, such as Aubin® CD-1B, Aubin® CD-4, Aubin® CD-6 or Aubin® CD-8.

Aubin®

Aubin® CR-130

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A high temperature retarder used at bottom hole circulating temperatures up to 350 °F. Aubin® CR-130 is usually used at concentrations between 0.1 and 0.5 %bwoc. It is compatible with other cement additives including polymer-based fluid loss additives and dispersants. The effect of Aubin® CR-130 on thickening time varies considerably from one brand of cement to another. It is recommended that each system is laboratory tested when designing the slurry to be run in the field. Do not age in mixwater for prolonged periods of time at low pH with polyols, PVA and some other polymers. If considering powder blending into cement, we recommend closely related Aubin® CR-120SB.

Aubin®

Aubin® CR-245

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A medium temperature cement retarder which can be used at 160 to 220 °F BHCT. Typically used at 0.1 to 2.0 %bwoc, dependent on temperature and slurry design. Soluble in mixwater; this product may degrade if stored in mixwater for excessive times, particularly in warm weather and with the presence of microbes in the water. If stored for prolongued times, it is recommended to prepare new mixwater or retest mixwater samples. Avoid excessive stacking pallets, if clumping is of concern.

Aubin®

Aubin® CR-400

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A synthetic retarder formulated to be effective at bottom hole circulating temperatures below 93 °C (200 °F) Aubin® CR-400 is stable through its temperature range and is of low sensitivity to small changes in concentration. Advantageous when long liners are cemented, cement sets in acceptable time at cooler liner top temperatures. Aubin® CR-400 is normally used at concentrations between 0.1 and 1.0% BWOC: generally 0.5% will give around 4 hours thickening time at 90°C (194°F). The effect of Aubin® CR-400 on thickening time can vary from one brand of cement to another; it is recommended that each slurry is laboratory tested to finalise the design.

Aubin®

Aubin® CR-450

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A synthetic high temperature retarder for use at bottom hole circulating temperatures from 212 to 284 °F (100 to 140 °C). Aubin® CR-450 delivers predictable thickening time response and rapid transition time over a wide range of concentrations & temperatures, advantages when long liners are being cemented. Normally used at concentrations between 0.1 and 4.0 %bwoc. Aubin® CR-450 may be dry blended with cement or dispersed in the mix water, in which case the mix water should be used without delay to prevent deterioration.

Aubin®

Aubin® CR-470

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A synthetic, high-temperature retarder, for use at bottom hole circulating temperatures from 90 to 140 °C (194 to 284 °F). Easier dosing control around 90 to 110 °C than Aubin® CR-475. Compatible with all API Classes of cement and most additives, Aubin® CR-470 can be used in both fresh water and sea water over a range of slurry densities. Also suitable for silicate-extended or thixotropic slurries. Delivers predicable thickening time response and rapid transition time over a wide range of concentrations and temperatures. Normally used at concentrations between 0.2 and 0.4 %bwoc, dependent on temperature, cement quality and other additives. Laboratory testing should always be carried out on all cement slurries, using representative material samples and well conditions, prior to performing a job.

Aubin®

Aubin® CR-475

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Synthetic retarder

Description

A synthetic high temperature retarder, for use at bottom hole circulating temperatures from 212 to 302 °F (100 to 150 °C). Compatible with all API Classes of cement and most additives, can be used in both fresh water and sea water over a range of slurry densities. Aubin® CR-475 also finds applications in slurries where lignosulphonates are not suitable, e.g. for silicate extended or thixotropic slurries. Delivers predictable thickening time response and rapid transition time over a wide range of concentrations & temperatures, an advantage when long liners are being cemented. Aubin® CR-475 is normally used at concentrations between 0.1 and 1.5% by weight of cement. Aubin® CR-475 may be dry blended with cement or dissolved in the mixwater, in which case the mixwater should be used without delay to prevent deterioration.

Aubin®

Aubin® CR-480

End Markets

Energy

Function

Cement Retarder

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed retarder type blend

Description

A synthetic high temperature retarder, for use at bottom hole circulating temperatures from 120 to 200 °C (248 to 392 °F). Normally used at concentrations between 0.1 and 4.0% by weight of cement. Displays a rapid transition time and excellent compatibility with all API Classes of cement and most additives. Aubin® CR-480 can be used in both fresh water and sea water over a range of slurry densities.

Aubin®

Aubin® CSP-500

End Markets

Energy

Function

Cement Spacer Gellant

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed polymer blend

Description

A powder spacer additive normally mixed at a wellsite with water, weighting agent and other spacer additives, providing a finished spacer fluid with range of fluid densities. Improves mud removal and zonal isolation and prevents mud/slurry incompatibility problems. Can be applied in a wide range of fluid density, depending on weighting agent, typically 1.0 – 2.4 g/ml (8.6 – 20 lb/gal). Good fluid loss control properties, depending on final spacer composition. Stable up to 121 °C (250 °F). For thicker slurries, loading may be around 12 - 20 lb/bbl.

Aubin®

Aubin® CSP-515

End Markets

Energy

Function

Cement Spacer Gellant

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed polymer blend

Description

A blend of rheology modifying agents developed to provide superior mud removal and zonal isolation. Improves mud removal and zonal isolation and prevents mud/slurry incompatibility problems. Can be applied in a wide range of fluid density, depending on weighting agent, typically 1.0 – 2.4 g/ml (8.6 – 20 lb/gal). Good fluid loss control properties, depending on final spacer composition. Stable up to 121 °C (250 °F). For thicker slurries, loading may be around 8 - 15 lb/bbl.

Aubin®

Aubin® CSP-520NS

End Markets

Energy

Function

Cement Spacer Gellant

Geography

EU

Application

Well Services

Business Area

Energy Solutions

Technology

Natural polymer gellant

Description

A cement spacer additive typically used in weighted spacer designs at bottomhole temperatures below 120 °C. Aubin® CSP-520NS is a powder spacer additive normally mixed at a wellsite with water, weighting agent and other spacer additives, providing a finished spacer fluid with range of fluid densities. Improves mud removal and zonal isolation, prevents mud/cement slurry incompatibility problems and affords good fluid loss control properties, with the correct final spacer composition. Stable up to 121 °C (250 °F). Due to the variation in drilling mud and cement slurry composition, laboratory fluid compatibility tests should always be run prior to performing a cement job.

Aubin®

Aubin® CSP-600

End Markets

Energy

Function

Cement Spacer Gellant

Geography

EU, MIDDLE EAST

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed polymer blend

Description

A cement spacer additive typically used in weighted spacer designs at bottomhole temperatures below 150 °C. Cement spacer Aubin® CSP-600 is a powder that is normally mixed at the wellsite along with water and weighting agent to provide a finished spacer fluid with the required fluid density; a spacer surfactant (such as Aubin® CSS-04) is also normally used in such a system. Spacers made with Aubin® CSP-600 improve mud removal and zonal isolation, prevent mud/cement slurry incompatibility problems and afford good fluid loss control properties, with the correct final spacer composition. Allows for a wide range of fluid density (typically 8.4 to 20 lb/gal); due to the variation in drilling mud and cement slurry composition, compatibility testing should always be run in a laboratory prior to performing a cement operation.

Aubin®

Aubin® CSS-04

End Markets

Energy

Function

Cement Spacer Surfactant

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed surfactant and solvent blend

Description

A cement spacer surfactant that has been developed for use in spacer systems, in order to remove hydrocarbon films and residues left behind from aqueous and non-aqueous drilling fluids. Through this function, cement slurry contamination can be minimized, ensuring cementing performance is delivered as expected. Additionally, Aubin® CSS-04 will leave surfaces-water wet, therefore aiding cement bonding and preventing possible communication channels between zones. Aubin® CSS-04 is classified under the OCNS as Gold rated with no substitution warning. Application rates typically range from 0.5 – 3 gal/bbl of spacer in fresh water and brine systems, although this will be dependent on the specific drilling fluid for a given application.

Aubin®

Aubin® CTX-15

End Markets

Energy

Function

Cement Thixotropic Additive

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed metal salt blend

Description

A liquid, cement thixotropic additive, which allows slurries to become immobile quickly when they are removed from high shear flow conditions. Thixotropic slurries are used where there is likely to be excessive fallback of the cement column, or where losses into the formation are high. In combination with a suitable pumping schedule, the flow of the slurry is stopped for a few minutes, allowing the slurry to gel and become immobile. When pumping is recommenced the slurry is readily moved in the high-shear area in the annulus, but remains static in the lower-shear zone of the loss area. In this way, better fill-up is achieved, with reduced slurry loss. These properties may also be useful in grouting applications. Normal slurry density range is 13 to 15.5 lb/gal (1.56 to 1.86 kg/L). Aubin® CTX-15 is normally used at 0.4 to 1.0 gal/sk of cement (3.55 to 8.88 L per 100 kg cement).
Contacts Suppliers