Product Finder

Filters

Clear
Reset Filters

Our Products

(54 products found)

Aubin®

Aubin® CTX-35R

End Markets

Energy

Function

Cement Thixotropic Additive

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Metal salt

Description

A thixotropic additive, which allows slurries to become immobile quickly when they are removed from high shear flow conditions. Designed to be used with Portland cement in primary cementing, lost circulation and squeeze applications, where the slurry is required to become immobile after placement. The use of calcium chloride increases the rate of gel strength development as well as accelerating the setting of the slurry. CTX-35R reacts with the C3A in the cement to provide thixotropy and a slight expansion of the cement when it sets. The reaction also results in the set cement being more resistant to attack by sulphate and chloride brines. Commonly used at 10 %bwoc, but can be used at various ratios to achieve the slurry properties required. Lost circulation materials can be added to the slurries to help control slurry loss into thief zones.

Aubin®

Aubin® CW-20

End Markets

Energy

Function

Wellbore Cleaner

Geography

AMERICAS, EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Non-ionic surfactant blend

Description

Aubin® CW-20 wellbore cleaner is normally used during drilling displacement operations, where it dissolves hydrocarbon fractions of both water- and oil-based mud residues, providing excellent mud removal and water wetting. For this reason, Aubin® CW-20 is used as pre-treatment for cementing operations, as it improves bonding to casing and formation. Aubin® CW-20 can also be used as a pre-flush ahead of a weighted spacer, as well as for pit cleaning and rig washing. Application rates as a casing cleaner are typically 5-20 % v/v in fresh water, seawater or brine.

Aubin®

Aubin® CW-30

End Markets

Energy

Function

Wellbore Cleaner

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Chemical blend

Description

Scales and clays may aggregate downhole in operations with all types of mud and are a common factor in stuck pipe during drilling operations. Aubin® CW-30 can be used following both water and oil-based mud applications, with some solvency properties for both types of mud, with the mechanism of action targetting scales and clays collected during drilling. For pipe release applications, Aubin® CW-30 is used neat and adequate volumes should be used to ensure complete break-down of filter cake.

Aubin®

Aubin® DF-4

End Markets

Energy

Function

Cement Defoamer

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Glycol-based polymer

Description

A cement antifoam used in the temperature range 80 – 300 °F. Certain materials used to modify the properties of cement slurries are known to cause foaming or air entrainment, or both. The resulting inaccuracies in slurry density measurements may cause the operator to reduce the water content in order to raise the surface density to the specified value. A severely reduced pumping time may be the end result, especially if retarders and other additives are premixed in the water. Aubin® DF-4 is used to help prevent foaming and air entrainment caused by additives such as retarders, fluid loss agents, and salt. No effect on cement properties has been found with Aubin® DF-4, and it is compatible with all API classes of cement and all additives including accelerators, retarders fluid loss additives, dispersants etc. Normal dosages of 0.02 to 0.05 gps, depending on the slurry design and slurry mixing method.

Aubin®

Aubin® EVO-Pig LG

End Markets

Energy

Function

Gel Pig Technology

Geography

GLOBAL

Application

Well Technologies & Pipelines

Business Area

Energy Solutions

Technology

Water based multicomponent

Description

Elastomeric pig suited for use where mechanical pigs cannot be transmitted. Used alone or in conjunction with gels and associated chemical products to maintain pipelines that would otherwise be considered “unpiggable”. Able to be compressed without alteration of their physical properties. Ability to regain, and retain, their original shape after compression and navigation of geometric pipeline changes. Readily negotiate short radius bends. To function effectively for pig transfer and use, it is not recommended to exceed 30 °C in storage.

Aubin®

Aubin® EVO-Pig XT

End Markets

Energy

Function

Gel Pig Technology

Geography

GLOBAL

Application

Well Technologies & Pipelines

Business Area

Energy Solutions

Technology

Silicone based multicomponent

Description

Elastomeric pig suited for use where mechanical pigs cannot be transmitted, offering a way to treat scaled, corroded, telescopic, or otherwise restricted pipelines across a variety of applications. Used alone or in conjunction with gels and associated chemical products to maintain pipelines that would otherwise be considered "unpiggable". Can be used for most standard pigging applications except for 'scraping', given the physical nature of the pig. Able to be compressed without alteration of its physical properties, and regains and retains its original shape after compression and navigation of geometric pipeline changes, readily negotiating short-radius bends. For effective pig transfer and use, storage temperature should not exceed 30 °C.

Aubin®

Aubin® FWG-15

End Markets

Energy

Function

Water Gelling Agent

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Natural polymer gellant

Description

A chemically modified cellulose derivative used as a gelling agent for water, brine and acid solutions. Aubin® FWG-15 is recommended for use in reservoirs which are responsive to water-based stimulation fluids. It is well suited for medium to high temperature reservoirs where high viscosities are not required and natural polymers would break down. Due to its’ residue-free nature, Aubin® FWG-15 is ideal for use in waterflood injection wells and gravel packing applications. Provides greater viscosity per kg and retains higher viscosities at elevated temperatures than natural polymers. Provides 60 - 70 % friction reduction as compared to water. Excellent fluid loss control can be obtained through the use of fluid loss additives or a 5% hydrocarbon phase. Compatible with CO2 and N2 where the inclusion of such a gas is desired to aid in recovery of the well. Can be used in KCl, CaCl2 or other oilfield brines for protection of water-sensitive clays. Unlike many other gelling agents and crosslinked fracturing fluids, Aubin® FWG-15 is not sensitive to high brine concentrations.

Aubin®

Aubin® FX-22

End Markets

Energy

Function

Crosslinker

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Borate-based

Description

Aubin® FX-22 is mainly used in hydraulic fracturing applications to increase the viscosity of guar and guar derivative-based fluids to improve proppant transport, increase fracture width and minimize leak-off. Benefits of Aubin® FX-22 include: • Allows fracturing of high temperature wells of up to 300 °F to be performed. • Provides surface crosslinking that builds viscosity rapidly enough for use in shallow wells • Delay times can be adjusted up to several minutes with the use of Aubin’s delaying agent, Aubin® FDA-01 • Provided in a concentrated, ready to use liquid form allowing for accurate metering and mixing on-the-fly • Compatible with common fracturing additives

Aubin®

Aubin® Hard-e-set

End Markets

Renewables

Function

Grouting Superplasticizer

Geography

EU, MENA

Application

Wind

Business Area

Energy Solutions

Technology

Polycarboxylate superplasticizers

Description

A superplacticiser designed for use with Ordinary Portland Cements (OPCs) in offshore grouting operations, with a particular benefit in early workability in high density/high compressive strength (~80-100 MPa) designs. Aubin® Hard-e-set is a liquid additive, which can be used in conventional cementing and grouting dosing systems for batch or continuous mixing options. Suitable for fresh or seawater mixes. Typical loadings may be 1 to 10 parts to 100 parts cement, depending on water requirement.

Aubin®

Aubin® HS-62

End Markets

Energy

Function

Hydrogen Sulfide Scavenger

Geography

MIDDLE EAST, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Hydrazine-based scavenger

Description

The active component of Aubin® HS-62 reacts to form covalent bonds with the sulfur of the H2S, removing the hazardous sulfide and reducing acidity. Aubin® HS-62 is a liquid material which can be used in gas, liquid hydrocarbon and aqueous systems, stimulation packages, tanks, production, and waste treatment systems. A minimum dosage of 700 ppm (0.07 %, 0.7 gpt) of Aubin® HS-62 to 100 ppm (0.01 %, 0.1 gpt) H2S should be used. The required dose may be higher depending on temperature, exposure time, turbulence, and other chemicals used within system.

Aubin®

Aubin® MEG Gel

End Markets

Energy

Function

Dewatering, drying

Geography

GLOBAL

Application

Well Technologies & Pipelines

Business Area

Energy Solutions

Technology

MEG, gellant & water

Description

A monoethylene glycol (MEG)-based pipeline gel - a mixture of MEG viscosified using a special blend of natural polymers - primarily used for the prevention of seawater ingress into spools during commissioning, but also suitable for dewatering/deoiling pipelines and for cleaning gas lines where concerns about hydrate formation prevent the use of aqueous products. As with all pipeline gels, it must be pushed with liquid rather than gas; if gas is the only available medium, a pig must be used at the back of the gel.

Aubin®

Aubin® OSB-03

End Markets

Energy

Function

Oil-based Slops Breaker

Geography

AMERICAS, EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Non-ionic surfactant blend

Description

The addition of Aubin® OSB-02 significantly reduces the emulsion content of the slop material, separating the components into distinct phases and providing a level of separation that will permit centrifugal, thermal and mechanical treatment. Suitable for a wide range of oil-containing slops compositions, reducing time required for effective separation. Concentration of application typically 1% v/v to 5% v/v.

Aubin®

Aubin® Resolv 260

End Markets

Energy

Function

Temporary Gel Plug

Geography

GLOBAL

Application

Well Technologies & Pipelines

Business Area

Energy Solutions

Technology

3-part system comprising high density base, dispersable gelling agent and agelation accelerating agent.

Description

Low viscosity, easy-to-mix pumpable fluid used as a temporary plug for workovers (e.g., wellhead repair), as a base for cement plugs, and for remediation of Sustained Casing Pressure leaks or other wellbore/annulus leaks. The fluid's low initial viscosity allows it to be pumped through narrow-bore well intervention equipment with minimal friction and pressure drop; over time it reacts to form a compliant, solid gel plug that seals like a gasket under hydrostatic pressure. The plug can be removed using a chemical breaker when required (e.g., prior to well decommissioning).

Aubin®

Aubin® SAI-310

End Markets

Energy

Function

Acid Corrosion Inhibitor

Geography

MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Quaternary amine salt blend

Description

A corrosion inhibitor for use in acidizing operations, which consists of a quaternary surfactant together with a blend of solvents and co-surfactants. Aubin® SAI-310 is effective in hydrochloric acid concentrations of up to 28 %. The product is effective up to 200 °F without intensifier but this can be extended to 300 °F using intensifiers such as Aubin® SAI-02 or Aubin® SAI-06.

Aubin®

Aubin® SCS-01

End Markets

Energy

Function

Stimulation Clay Stabilizer

Geography

AMERICAS, EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Quaternary amine salt

Description

A highly concentrated liquid clay stabiliser for use as a potassium chloride substitute in oilfield applications. Prevents swelling of clays and minimises fine migration within the formation. Low toxicity and surfactant free KCl substitute. Provided in an easy to use, liquid form which simplifies handling and mixing. Highly concentrated to reduce shipping costs and lower dosages. No known incompatibilities with common oilfield chemicals. Typical loadings of SCS-01 are in the range of 1 – 5 gpt, depending on the clay sensitivity of the formation.
Contacts Suppliers