Product Finder

Our Products

(151 products found)

Aubin®

Aubin® SFA-07

End Markets

Energy

Function

Foamer

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Surfactant blend

Description

A foaming agent, useful in gas well deliquification for a wide range of wellbore and formation fluids. Decreases in pressure and the reduction in gas velocity can lead to liquid loading within a well, resulting in reduced production and eventually end of life for the well. Aubin® SFA-07 can help reduce the liquid density and allow the production to be increased. It is a cost-effective method for gas production enhancement, avoiding the need for mechanical lifting. It is suitable for condensate-depleted gas wells, water and condensate unloading gas wells, batch or continuous application, and with low or high salinity fluids. Dosage variy between 3,000 – 80,000 ppm, depending on the application, and it can be used in temperatures up to 170 °C.

Aubin®

Aubin® SFS-05

End Markets

Energy

Function

Breaker, Iron Sequestrant

Geography

EU, MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Carbohydrate salt

Description

Used to prevent the precipitation of ferric hydroxide in spent hydrochloric acid. This additive converts ferric iron into ferrous iron, preventing this type of precipitation below pH 7.7 (spent hydrochloric rarely has a pH over 5.5). Aubin® SFS-05 is typically added at 5-15 lbs per 1000 US gallons of acid. 1.96 grams of Aubin® SFS-05 per litre of acid is sufficient to treat 1 gram of ferric. It will not reduce ferric iron until residual acid is ~3.5 %w/w – an additional iron control agent such as Aubin® SFS-01, SFS-03 and SFS-04 may give complementary protection, e.g. in sour systems where protection is required against FeS.

Aubin®

Aubin® SS-920

End Markets

Energy

Function

Surface Tension Reducer

Geography

MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Non-ionic surfactant blend

Description

Stimulation surfactant additive Aubin® SS-920 is a surface active agent used in acids, brines and water-based fracturing fluids. The surface tension of acids can be reduced from their initial values of approximately 72 dynes/cm down to 20 dynes/cm or less. Aubin® SS-920 is normally used at a rate of 2 gallons per 1000 gallons of fracturing fluid and 4 gallons per 1000 gallons of matrix acidizing fluids.

Aubin®

Aubin® SS-940

End Markets

Energy

Function

Anti-Sludge Surfactant

Geography

MENA, NAM

Application

Well Services

Business Area

Energy Solutions

Technology

Anionic surfactant blend

Description

A surfactant blend which is added to acids to help prevent the formation of sludge and emulsions during acidizing treatments. Insoluble sludge deposits are formed by some crude oils when contacted with acid, and partial or even complete plugging of a producing zone may occur. Anti-sludge additives such as Aubin® SS-940 act as colloid stabilisers and function to prevent the coagulation of unstable colloidal material present in some crude oils. Aubin® SS-940 is an anionic anti-sludge agent and can also perform as an effective emulsion preventer. Loading levels of 1 to 2 % are generally required, however laboratory testing is always recommended before use.

Aubin®

Aubin® Xclude

End Markets

Energy

Function

Plug & Abandonment

Geography

GLOBAL

Application

Well Technologies & Pipelines

Business Area

Energy Solutions

Technology

3-component fluid system generating controlled deposition of sulfate based scale

Description

Innovative barrier technology for well abandonment. Calibrated mix of 3 fluid components pumped to target reservoir zones to create inorganic mineral scale within reservoir pore spaces to reduce permeability. Alternative barrier technology for well abandonment which sees injected fluids placed within target formation and the subsequent in-situ generation of sulfate based scale for reduction of permeabilty through the blocking of pore throats and pore spaces. Well bore tubing remains free of restrictions allowing for other well intervention activity or use of tubing based P&A technologies.

Aubin®

Aubin® Xloss / Aubin® Xloss LCM

End Markets

Energy

Function

Cement Bond Enhancement System

Geography

GLOBAL

Application

Well Technologies & Pipelines

Business Area

Energy Solutions

Technology

Mix of fluid control polymers and lost circulation material

Description

A cement spacer package that acts against lost circulation by plugging fractures in the formation rock and water-wetting it to allow good bonding of the cement to the formation and casing, forming a rapid seal that minimizes cement loss to formation and prevents damaging filtrate into the formation. An enhancer (Xloss LCM) is available to prevent losses in highly permeable, fractured systems. Improves hole cleaning through plug-flow displacement of drilling fluid. Stable up to 400 °F and compatible with widely used cement systems, drilling fluids, and common weighting agents up to 19 ppg.

Aubin®

Aubin® XLoss LCM

End Markets

Energy

Function

Cement Spacer Loss Circulation Material

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

Mixed natural fibre-based material

Description

Aubin® XLoss and Aubin® XLoss LCM may be used in weighted spacers – typically with barite, forming pumpable, stable spacers with a shear thinning rheology. Features of the system are that it creates a rapidly forming seal, preventing damaging filtrate entering the formation, it improves hole cleaning through plug flow displacement of drilling fluid and it is stable up to 400 °F. Compatible with all common weighting agents to 19 ppg.

Aubin®

Aubin® Xmax

End Markets

Energy

Function

Zonal Isolation

Geography

GLOBAL

Application

Well Technologies & Pipelines

Business Area

Energy Solutions

Technology

3-component fluid system generating controlled deposition of sulfate based scale

Description

Innovative barrier technology for zonal isolation. Calibrated mix of 3 fluid components pumped to target reservoir zones to create inorganic mineral scale within reservoir pore spaces to reduce permeability. Alternative barrier technology for zonal isolation. Sees injected fluids placed within target formation and the subsequent in-situ generation of sulfate based scale for reduction of permeabilty through the blocking of pore throats and pore spaces. Well bore tubing remains free of restrictions allowing for other well intervention activity or continued production from new or more profitable production intervals.

Bellacide®

Bellacide® 300/W

End Markets

Energy

Function

Microbial Control

Geography

Application

Biocide

Business Area

Energy Solutions

Technology

Tributyltetradecylphosphonium chloride (TTPC) + Polymeric quaternary ammonium compound (5% active)

Description

Bellacide® 300 is a synergistic blend of two non-oxidizing biocides that provides broad-spectrum microbial control in oilfield operations. It effectively eliminates sulfate-reducing bacteria (SRB), acid-producing bacteria (APB), and biofilm at low dosages. The product is compatible with friction reducers, gelling agents, and breakers, and maintains efficacy in high temperature conditions. Bellacide® 300 is compatible with oxidizing biocides, such as chlorine dioxide and PAA and is not a skin sensitizer, making it easier to handle.

Bellacide®

Bellacide® 332

End Markets

Energy

Function

Microbial Control

Geography

Application

Biocide

Business Area

Energy Solutions

Technology

Polyhexamethylene biguanide (PHMB) + Polymeric quaternary ammonium compound (3.2% active)

Description

Dilution of Bellacide® 364, for use in freshwater applications. Winterization not available.

Bellacide®

Bellacide® 348/W

End Markets

Energy

Function

Microbial Control

Geography

Application

Biocide

Business Area

Energy Solutions

Technology

Polyhexamethylene biguanide (PHMB) + Polymeric quaternary ammonium compound (4.8% active)

Description

Dilution of Bellacide® 364, for use in freshwater applications.

Bellacide®

Bellacide® 350

End Markets

Energy, Water

Function

Biocide

Geography

AMERICAS

Application

Biocide, Industrial Water Treatment & Process

Business Area

Advanced Water Solutions, Energy Solutions

Technology

Tributyltetradecylphosphonium chloride (TTPC) (50% active)

Description

Concentrated TTPC. non oxidizing biocide for industrial water treatment and energy applications

Bellacide®

Bellacide® 355/W

End Markets

Energy

Function

Microbial Control

Geography

NAM

Application

Biocide

Business Area

Energy Solutions

Technology

Tributyltetradecylphosphonium chloride (TTPC) (5% active)

Description

Bellacide® 355 is a 5% active non-oxidizing biocide based on tributyl tetradecyl phosphonium chloride (TTPC) chemistry. It delivers fast-acting, long-lasting control of aerobic and anaerobic bacteria, algae, and fungi. Bellacide® 355 is effective across a wide pH range, extremely thermally stable, and compatible with oxidizing agents like chlorine.

Bellacide®

Bellacide® 364/W

End Markets

Energy

Function

Microbial Control

Geography

Application

Biocide

Business Area

Energy Solutions

Technology

Polyhexamethylene biguanide (PHMB) + Polymeric quaternary ammonium compound (6.4% active)

Description

A recently registered, non-oxidizing biocide offering rapid microbial kill and extended protection with a safer environmental and health profile. Bellacide® 364 delivers quick microbial kill and long-term activity. It targets a broad range of microorganisms, making it ideal for oilfield applications. Bellacide® 364 is compatible with common oilfield chemistries and has lower hazard classifications compared to other commonly used biocides, improving safety for handling and reducing environmental impact.

Bellasol®

Bellasol FLA01

End Markets

Energy

Function

Cement Fluid Loss Additive

Geography

EU, MENA

Application

Well Services

Business Area

Energy Solutions

Technology

High molecular weight AMPS-acrylamide-based polymer

Description

A liquid cement fluid loss additive that functions up to at least 400 °C. Example slurry designs with typical results include: Slurry 1 90 °C Dyckerhoff API Class G cement slurry to 15.8 ppg density; 1.0 gps Bellasol FLA01; 0.75 %bwoc Aubin® CD-1B; 4.00 gal/sack Fresh Water - fluid loss: 22 cc/30 minutes; Slurry 2 200 °C Dyckerhoff API Class G cement slurry to 15.8 ppg density; 35 %bwoc Silica Flour; 1.5 %bwoc Aubin® CR-475; 0.5 %bwoc Aubin® CD-1B; 1.5 gps Bellasol FLA01; 1 %bwoc Aubin® CAS-04; 5.25 gps Fresh Water – fluid loss: 68 cc/30minutes.

Product Finder

What are you looking for?